Debarshi Ray [Thu, 9 Jan 2014 14:36:41 +0000 (15:36 +0100)]
appDisplay: Special case terminal launching
One of the most frequent complaints about our launching behaviour is
how we handle terminals. Among all MDI applications, the terminal is
the one that is most likely to have lots of semi-independent windows
opened at the same time, and spawning new windows is much more common.
More so, if it does not support tabs.
Therefore, we special case terminal launchers to always create a new
window. It is an application that most non-technical users will not
use, so chances of them being confused by any special behaviour is
expected to be low.
Ray Strode [Tue, 7 Jan 2014 18:14:31 +0000 (13:14 -0500)]
main: allow session mode to be specified in the environment
Specifying the session mode on the command-line doesn't play
well with session management (since the saved session desktop
file well either drop the specified session mode, or force it
always, even if the user picked a different mode at the login
screen)
This commit adds support for specifying the session mode via an
enviroment variable. For now, keep the old command line interface
for backward compatibility
ShellWindowTracker: fix reference counting of ShellApp
All get_app_from_*() helpers are transfer full, but
get_app_from_gapplication_id() was directly returning the result
of lookup_app(), which is transfer none.
WorkspacesView: fix removal of workspaces that are not at the end
Workspaces can removed from any index, and in particular they
will be removed by the WorkspaceTracker if they stop containing
windows at some point. Make sure WorkspacesView is not confused
and destroyes the right Workspace objects.
ShellAppSystem: own the memory for the startup wm class and app id
The hash table must keep a copy of the IDs, because the GAppInfos
are unreferenced (and thus freed) at the end of the function.
This was possibly not a problem if the GAppInfos were referencing
the memory-mapped cache, but it becomes one for regularly parsed
desktop files in ~/.local.
Florian Müllner [Mon, 18 Nov 2013 12:53:27 +0000 (13:53 +0100)]
runDialog: Explicitly set horizontal alignment
When set to fill, the label will always end up left-aligned, which
is only correct in LTR locales. Set the alignment explicitly to
work in both RTL and LTR locales.
Dan Williams [Wed, 4 Dec 2013 04:07:16 +0000 (22:07 -0600)]
NetworkAgent: handle empty hints and VPN secrets correctly
get_secrets_keyring_cb() contained an optimization (copied over from
nm-applet) that avoided a D-Bus round-trip when NetworkManager sent
secrets hints that were not satisified by the user. This code did
not properly handle empty hints though, and proceeded to always
request new secrets whenever empty hints were sent. Remove this
code entirely since the complexity is not worth it (per Jasper).
Second, get_secrets_keyring_cb() was mishandling VPN secrets which
were marked as "always ask". Because the VPN secrets are not GObject
properties because they cannot be pre-defined, they are passed in
a hash table that is a GObject property marked 'secret'. Unfortunately,
that means that the shell agent cannot determine their secret flags.
But since the VPN plugin auth dialogs have much better information
about what's required than the shell agent does, always ask the VPN
auth dialogs to handle the secrets requests after grabbing any that
already exist from the keyring. This is also what nm-applet does.
Yosef Or Boczko [Wed, 11 Dec 2013 20:38:58 +0000 (22:38 +0200)]
polkitAgent: Explicitly set horizontal alignment
When set to fill, the label will always end up left-aligned, which
is only correct in LTR locales. Set the alignment explicitly to
work in both RTL and LTR locales.
Yosef Or Boczko [Wed, 11 Dec 2013 20:36:49 +0000 (22:36 +0200)]
unlockDialog: Explicitly set horizontal alignment
When set to fill, the label will always end up left-aligned, which
is only correct in LTR locales. Set the alignment explicitly to
work in both RTL and LTR locales.
Yosef Or Boczko [Wed, 11 Dec 2013 20:36:15 +0000 (22:36 +0200)]
authPrompt: Explicitly set horizontal alignment
When set to fill, the label will always end up left-aligned, which
is only correct in LTR locales. Set the alignment explicitly to
work in both RTL and LTR locales.
Florian Müllner [Wed, 4 Dec 2013 16:26:01 +0000 (17:26 +0100)]
shell-app: Track all application windows
Filtering out "non-interesting" windows beforehand as we currently do
means that we may get properties that should be based on all windows,
like the last time the application was used, wrong.
Just track all windows and filter out non-interesting windows manually
in the one place we actually care about the difference.
As far as I can tell, the only behavior change of a transient source
is that they auto-destroy after viewing their summary box pointer.
Since all transient sources are only associated with transient
notifications, it seems that we can never get to their summary box
pointer in the first place! Remove support for this.
viewSelector: Give the active page key focus when it is shown
Rather than implement special focus policies like only allowing keynav
when pressing down, simply give the active page key focus when entering
the overview.
This may break stuff, as it's somewhat of a tricky patch to get right.
Testing this one would be super appreciated.
workspace: Implement key navigation on the workspaces page
Simply use St's existing key navigation system by making all the window
clones StWidgets, and making the WorkspacesView a focus group.
Since the workspace view is effectively "fake", we need to add a focus
delegator so that when key focus is assigned to the fake workspaces page,
we can keynav inside it properly.
st-widget: Sort actors by distance from the focused actor
Sorting actors by the distance in the axis of movement first and against
the axis otherwise means that if we have a situation like:
A F
B
where "F" is the focused actor, and it slightly overlaps with B vertically,
then we'll choose "B" to go left, rather than "A", which is most likely
what the user intended.
This is especially apparent in the overview where slight window size
differences mean we might not get an exact grid shape.
messageTray: Only attempt to grab the summary box pointer after showing it
For mysterious reasons I'm not sure of myself, navigate_focus will only focus
mapped actors. So, make sure the widget is showing before navigating to it.
background: Don't silently fizzle out when removing bad content from the cache
If the background is already removed, or we're trying to remove bad content,
this is probably a bug in content accounting, so let us crash so we can fix
the bugs.
background: Don't wait for gdk-pixbuf to fail before loading animations
We don't have any better way of determining whether something is a slideshow
animation, so discriminate on the .xml filename instead of waiting for
gdk-pixbuf to determine whether it can load a file or not.
UserWidget: replace vfunc_destroy override with a signal connection
The destroy vfunc might be called during object finalization, and
we can't call any JS from a GC finalizer, so we use a signal
connection instead, as that is removed by GObject the first time
the object is disposed.
Ray Strode [Tue, 26 Nov 2013 03:30:53 +0000 (22:30 -0500)]
authPrompt: propagate gdm "reset" signal after user switching
After a user types in their password at the login screen, one
of two things can happen
1) a new session is started
2) an existing session is switched to
In the latter case, GDM sends a reset signal to the login screen,
so it knows to go back to the user list and wait to be summoned
again.
Unfortunately, all reset signals are ignored after verification
success. The reason is because the reset handler was copied from
the unlock dialog as part of a deduplication effort in commit 7e7295f259febf34c89659a9bcb05f9924fa1976 and the unlock dialog
handler at the time also emitted a "failed" signal on reset
(which wouldn't make sense to emit after success).
These days "failed" is handled in a different way.
This commit changes the code to let reset signals through after
successful verification.
projects / gnome-shell.git / log